DIY | How to Make Flowers from Crepe Paper | Giant Dandelion (part 1 subt. Eng)
22 478
29.5
Обустроено195 тыс
Следующее
15.07.17 – 26 02511:58Популярные
26.04.20 – 15 2061:11:14
16.11.18 – 35 73811:54Опубликовано 14 июля 2017, 18:47
DIY. How to Make Flowers from Crepe Paper | Master Class How To Make Large Paper Flowers With Their Hands | Giant Dandelion (part 1 subtitles in English)
Part 2 - youtu.be/3VnAyZsRcSs
Hello.
Today, in my blog OBUSTROENO.COM I want to make large paper dandelion, which you asked in the comments. What we need Wood skewers and foam plastic ball d. 7-8 centimeters. Look how to identify diameter of future dandelion - take the ball and the insert 2 skewers. Here you see the diameter of the future dandelion.
If that's not enough, you can take the floristic wire. It is longer than skewer. Or you can take bigger ball. But remember - in this case, you need more dandelion fluff. Also you you will need: white crepe paper white tapes tape scissors; piece syntepon (I do not advise to use holofayber, because it has a small balls, and they are not very good for dandelion); and a glue gun.
Well, let's start. Cut off 50 centimeters white crepe paper. Now cut the strip 6-7 centimeters. Each strip add up doubled and doubled again. Now cut. As a result, we have turned here are the billet 6 centimeters. On each piece of fluff need 2 blanks. Now take a skewer, adhesive gun and made workpiece.
Apply the adhesive is applied skewer blunt edge and wrap. As a result, we have turned sweat such panicles. Now we must add the fluff. It will be sintepon. Separated from the sheet a piece (not cut off). It will look ugly.
Now, through a piece of syntepon We are threading our broom. That is what we must have. Then take a second workpiece fringed glue gun. Put on the glue and glue over syntepon. Such fluff will be our dandelion. If you do not have white teip feeds do not rush to buy it. Now I'll show you a little focus.
Cut off from the white crepe paper strip width 1 centimeter and stretch it. Now, apply the adhesive and similarly teip-wrap tape. But as we will consolidate glue gun, then the process will not be very fast. In the middle of drip drops adhesive to the paper is not slipped. That's the way you can do without teip feeds. But if you have it, then the process will be faster.
Смотрите новое видео из цикла "Третья шляпная коробка с тропическими цветами". В этот раз автор показывает как делать ГИБИСКУС из фоамирана youtu.be/iD67ZuRMSA8
Part 2 - youtu.be/3VnAyZsRcSs
Hello.
Today, in my blog OBUSTROENO.COM I want to make large paper dandelion, which you asked in the comments. What we need Wood skewers and foam plastic ball d. 7-8 centimeters. Look how to identify diameter of future dandelion - take the ball and the insert 2 skewers. Here you see the diameter of the future dandelion.
If that's not enough, you can take the floristic wire. It is longer than skewer. Or you can take bigger ball. But remember - in this case, you need more dandelion fluff. Also you you will need: white crepe paper white tapes tape scissors; piece syntepon (I do not advise to use holofayber, because it has a small balls, and they are not very good for dandelion); and a glue gun.
Well, let's start. Cut off 50 centimeters white crepe paper. Now cut the strip 6-7 centimeters. Each strip add up doubled and doubled again. Now cut. As a result, we have turned here are the billet 6 centimeters. On each piece of fluff need 2 blanks. Now take a skewer, adhesive gun and made workpiece.
Apply the adhesive is applied skewer blunt edge and wrap. As a result, we have turned sweat such panicles. Now we must add the fluff. It will be sintepon. Separated from the sheet a piece (not cut off). It will look ugly.
Now, through a piece of syntepon We are threading our broom. That is what we must have. Then take a second workpiece fringed glue gun. Put on the glue and glue over syntepon. Such fluff will be our dandelion. If you do not have white teip feeds do not rush to buy it. Now I'll show you a little focus.
Cut off from the white crepe paper strip width 1 centimeter and stretch it. Now, apply the adhesive and similarly teip-wrap tape. But as we will consolidate glue gun, then the process will not be very fast. In the middle of drip drops adhesive to the paper is not slipped. That's the way you can do without teip feeds. But if you have it, then the process will be faster.
Смотрите новое видео из цикла "Третья шляпная коробка с тропическими цветами". В этот раз автор показывает как делать ГИБИСКУС из фоамирана youtu.be/iD67ZuRMSA8
Свежие видео
17 дней – 4 8870:49
20 дней – 2 1172:00:05
21 день – 4001:03
26 дней – 1 542 4090:57
27 дней – 1 80848:52
22 дня – 4 70858:50Случайные видео
237 дней – 7 93111:50
296 дней – 4 3428:03
31.12.22 – 5 79110:02
08.05.20 – 11 57415:53
10.01.16 – 36 6591:02
9 дней – 2 2920:41
11 дней – 79 26911:24:56
13 дней – 17 05945:01
26 дней – 17 2590:18
31 день – 3 96431:28
35 дней – 2 7600:23
36 дней – 113 0810:33
3 дня – 1403:35