PC4USER62.8 тыс
Следующее
Опубликовано 21 августа 2016, 13:38
Новый канал по заработку: youtube.com/channel/UCLBotJkYM...
CryptoHands заработок youtube.com/watch?v=YIZqRa0WDb... Instructions for LG L70 D325 recovery mode Hard Brick to working condition
на русском о LG L80 D380 DBI Err Fatal Repair решение этой проблемы - youtube.com/watch?v=tK8VcQ-mj3...
Signs of Hard Brick mode for this model:
- The phone is not charged and is not included (screen is black)
- You can not go into Recovery Mode
- Can not go to the Download Mode
- When connected to a computer is defined as a device driver installation QHSUSB_BULK enters names Qualcomm bootloader ...... 9008
What is needed to restore the phone:
- MicroSD card
- The boot image
catcut.net/aJF0 DiskImageRev2
catcut.net/bJF0 HDDLLFsetup
catcut.net/eJF0 LG Flash Tool 2014_New [For KDZ files]
catcut.net/fJF0 LGL80D380
catcut.net/gJF0 LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
catcut.net/hJF0 Loader LGL80D380
catcut.net/kJF0 additions
1) Connect your phone to your computer
2) Install the program to format the Hard Disk Low Level Format Tools continue to run it
3) We see in the program to format the disk display the phone's internal memory
4) Format the memory, do not forget to put a tick in formatting PERFORM QWICK WIPE
5) Do not remove the phone from the PC
6) Go to my computer, there you will see a flash drive, click on it and format the default means of WINDOWS
7) Run the program to record the image IMG DiskImageRev2
8) Specify the path to the downloaded and extract the image LOADER.IMG
9) Specify the letter of the formatted drive
10) Next, put the box on the MB5 HASH press WRITE, further confirm the action
11) Remove the battery cable, wait for 5 sec., Insert the battery, hold the volume "+" button and connect the USB
12) Your phone starts to DOWNLOADER
13) Next to flash off program LGMobile Support Tool - error after a failed upgrade
229868
UPD: Pink screen (which is higher) appears while holding VOL- and connection to the BB. When sandwiched VOL + part of the DL-mode, but no connection to the BB, and then a black screen appears (spoiler below). In both cases, it became defined as the "LGE AndroidNet USB Serial Port" in the Device Manager, and then a couple of seconds. LGFleshTool not even picks. And so, in both cases indefinitely. Without a bootable USB drive is determined by the "Qualcomm HS-USB QDLoader 9008".
229870
Or
Loader.img Copy the file to your computer.
3) Download and unpack the archive Files Hard Unbrick SM-N9005 32 GB.rar
4) Take an empty USB flash drive company SanDisk Micro SD or AData and paste in CardReader, connected to a computer or laptop
5) Run DiskImageRev2.exe program unzipped in paragraph 3
Now specify the drive letter by which defined Micro SD, as well as an image file click "Write". We are waiting for the download is complete ... After about a minute get bootable USB flash drive for recovery
6) Take the "dead" phone LG. We take out the battery and insert a few seconds of it. Then inserted into the phone our resuscitation Micro SD
7) Install, if necessary, LG USB drivers and connect your phone via original USB cable to the computer. After a few seconds, turn on the phone's screen
8) Then launch LG Mobile support Tool
youtube.com/watch?v=0E6KXgWuaH... - Desmeon - Undone (feat. Steklo) [NCS Release]
CryptoHands заработок youtube.com/watch?v=YIZqRa0WDb... Instructions for LG L70 D325 recovery mode Hard Brick to working condition
на русском о LG L80 D380 DBI Err Fatal Repair решение этой проблемы - youtube.com/watch?v=tK8VcQ-mj3...
Signs of Hard Brick mode for this model:
- The phone is not charged and is not included (screen is black)
- You can not go into Recovery Mode
- Can not go to the Download Mode
- When connected to a computer is defined as a device driver installation QHSUSB_BULK enters names Qualcomm bootloader ...... 9008
What is needed to restore the phone:
- MicroSD card
- The boot image
catcut.net/aJF0 DiskImageRev2
catcut.net/bJF0 HDDLLFsetup
catcut.net/eJF0 LG Flash Tool 2014_New [For KDZ files]
catcut.net/fJF0 LGL80D380
catcut.net/gJF0 LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
catcut.net/hJF0 Loader LGL80D380
catcut.net/kJF0 additions
1) Connect your phone to your computer
2) Install the program to format the Hard Disk Low Level Format Tools continue to run it
3) We see in the program to format the disk display the phone's internal memory
4) Format the memory, do not forget to put a tick in formatting PERFORM QWICK WIPE
5) Do not remove the phone from the PC
6) Go to my computer, there you will see a flash drive, click on it and format the default means of WINDOWS
7) Run the program to record the image IMG DiskImageRev2
8) Specify the path to the downloaded and extract the image LOADER.IMG
9) Specify the letter of the formatted drive
10) Next, put the box on the MB5 HASH press WRITE, further confirm the action
11) Remove the battery cable, wait for 5 sec., Insert the battery, hold the volume "+" button and connect the USB
12) Your phone starts to DOWNLOADER
13) Next to flash off program LGMobile Support Tool - error after a failed upgrade
229868
UPD: Pink screen (which is higher) appears while holding VOL- and connection to the BB. When sandwiched VOL + part of the DL-mode, but no connection to the BB, and then a black screen appears (spoiler below). In both cases, it became defined as the "LGE AndroidNet USB Serial Port" in the Device Manager, and then a couple of seconds. LGFleshTool not even picks. And so, in both cases indefinitely. Without a bootable USB drive is determined by the "Qualcomm HS-USB QDLoader 9008".
229870
Or
Loader.img Copy the file to your computer.
3) Download and unpack the archive Files Hard Unbrick SM-N9005 32 GB.rar
4) Take an empty USB flash drive company SanDisk Micro SD or AData and paste in CardReader, connected to a computer or laptop
5) Run DiskImageRev2.exe program unzipped in paragraph 3
Now specify the drive letter by which defined Micro SD, as well as an image file click "Write". We are waiting for the download is complete ... After about a minute get bootable USB flash drive for recovery
6) Take the "dead" phone LG. We take out the battery and insert a few seconds of it. Then inserted into the phone our resuscitation Micro SD
7) Install, if necessary, LG USB drivers and connect your phone via original USB cable to the computer. After a few seconds, turn on the phone's screen
8) Then launch LG Mobile support Tool
youtube.com/watch?v=0E6KXgWuaH... - Desmeon - Undone (feat. Steklo) [NCS Release]
Свежие видео
Случайные видео