How to Make a Steel Skateboard Hanger | I Like To Make Stuff

Опубликовано 9 ноября 2017, 19:20

I made a hanger to store a skateboard and a helmet!

TOOLS & SUPPLIES:

kit.co/iliketomakestuff/my-met...
kit.co/iliketomakestuff/shop-s...
Evolution Metal Cutting Saw: amzn.to/2zKHSVj

In my family, we have a lot of skateboards. I was tired of them all over the floor so I designed a hanger that attached to the wall, held a helmet, and showed off the underside graphics. This design started off with a set of requirements: 1. Get the boards off the floor; 2. Each board had to have an accompanied helmet; 3. I don't want to stare at grip tape, I want to see the graphics. I decided on using steel square stock for the construction of my unique "hook" design. It is strong enough to hold the weight while needing minimal support braces. I really like the minimalistic look of the hanger because it allowed me to showcase the board and the helmet instead of a bulky rack.

I cut the square tubing into pieces with 30 degree angles and welded them up.  I learned half-way through the initial welds that I was running out of gas, causing my welds to be extra ugly. After a trip to the metal supply shop and A LOT of grinding, I had my hook shape. I took an extra angled bar and welded it on top of the hanger to hold the helmet. I used a piece of 1/8 inch flat steel to attach the hanger to the wall. I drilled the mounting holes in the flat stock and welded the assembly all together.

After a few coats of primer and my favorite color of paint, it was ready to go. I attached the hanger to the wall with lag bolts; first, because they are strong when drilled into studs, and second, because there wasn't much clearance for a drill to properly drive in screws but a low-profile ratchet wrench worked just fine.

I hung up my wife's longboard along with her helmet and this project was done. If you enjoyed this metalworking project or want to see how I solved some other household problems, check out the metalworking playlist above!

Subscribe: bit.ly/ILikeToMakestuffSubscri...
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVide...

Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com

Want to support ILTMS? Get exclusive content and more...
iliketomakestuff.com/patreon

FOLLOW:
instagram.com/iliketomakestuff
twitter.com/iliketomakestuff
facebook.com/iltms

#ILikeToMakeStuff

About I Like To Make Stuff:

We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!

These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!

How to Make a Steel Skateboard Hanger | I Like To Make Stuff
youtube.com/watch?v=KhCnJjJGJW...

I Like To Make Stuff
youtube.com/Iliketomakestuff