EricTheCarGuy

In this video I dissect 2 D16Y7 Honda engines to find the cause of the failures they had. One engine had a catastrophic failure, a broken connecting rod, the other had a severe overheat condition.

In this video I replace the engine and automatic transmission in my sons 1999 Honda Civic. Personally, I don’t see this as a difficult job, especially if you’re fortunate enough to have a lift.

I recently picked up this D16Y7 as a replacement engine for my sons 1999 Honda Civic. When it arrived I looked it over to make sure everything was OK, but also to see what kind of shape it was in.

I wanted to see if my lowered 1990 C1500 Chevy Truck could haul a car trailer. I quickly discovered that my suspension wasn’t up to the task.

In this video I remove the engine and automatic transmission from the 2000 Honda Civic I picked up from Pull-A-Part a couple of weeks back. I’m hoping the transmission is still good.

I recently picked up this 2000 Honda Civic from the Pull-A-Part in Indianapolis Indiana. I needed a replacement engine and transmission for my oldest sons 1999 Honda Civic.

**Sponsored Video** Have you ever heard of “active engine mounts”? If so, have you ever wondered how they work?

This 1972 Chevy Nova with LS power has a really bad noise coming from its 12 bolt rear end. In this episode I take you through the process of diagnosing and repairing this noise.

A bad brake hose may be difficult to find. They can sometimes be confused with a bad brake caliper. In this video I share my method of diagnosing a bad brake hose.

This problem happens often on Hondas, especially with the front lower strut attachment where the fork meets the lower control arm.

If you’re curious about what’s inside a Honda power steering rack, watch this video. In it, I completely disassemble the power steering rack I took out of my 2012 Honda Odyssey.

I had a strange issue with the power steering rack in my 2012 Honda Odyssey. It would ‘rattle’ in the steering column when going over bumps. I suspected a damaged power steering rack was the cause.

If you’re looking to improve the handling of your Chevy truck, or any vehicle for that matter, I highly recommend the addition of a good rear stabilizer bar.

For me, using a pinion depth gauge is the best way to measure pinion depth and finding the perfect pinion shim. It’s way more accurate than going by gear tooth pattern and saves a bunch of time.

This video chronicles what I went through to diagnose a whining noise coming from the 10 bolt (8.5” 30 spline) differential of my 1990 C1500 truck (GMT400/OBS).

By far this is the best performance upgrade I’ve done to my 2000 Integra Type R so far. Not only was performance increased, but in my case, emissions as well.

I recently had a Saginaw power steering pump failure on my #ETCGDadsTruck build. In this video I tear down the faulty pump to see what the issue was.

I’ve been having an issue with the power steering on #ETCGDadsTruck since just about the first time I started it up.

This video covers the complete tear down of a Jackson Racing supercharger for a B series Honda. This information will also apply to other roots style superchargers.

It’s not often you need to replace the parking brake shoes on a rear disc brake set up, but if you do, this video will guide you through it. The vehicle used in this video is a 2004 Honda Element.

Ever since I got my 2000 Integra Type R, the windshield wipers have had issues. Not only were they installed incorrectly, but they were also loose and didn’t operate properly.

*Sponsored Video* If you’re looking for a more eco friendly oil change solution, you might check out the new packaging from Havoline made by Chevron.

There are a few different methods you can use for tire repair. The method I show in this video is considered the ‘best possible tire repair’. This method is also known as the “Tire Plug/Patch Repair”.

It’s been a while since I updated my channel promo so here it is, the EricTheCarGuy 2020 Channel Promo. If you’re new to the channel, this is an introduction to what I do.

Does your Honda K series engine have a sizable oil leak? If so, it could be the VTEC solenoid gasket that’s leaking.

I needed to install a trailer brake controller and wire in a 7 way connector to haul a car trailer with my truck, a 1990 C1500.

I gave away my Mustang and you helped. Well, some of you helped. Those of you that follow me on social media that is. I cover the story in detail in the video.

In this video “ITR vs GSR”, I compare the Acura Integra Type R to the Acura Integra GSR.

I’ve partnered up with Craftsman tools for this awesome giveaway! bit.ly/2W1SE3T **Sponsored Video** Stanley Black & Decker, Inc. and its affiliates are not the sponsor of this giveaway.

In this video I show you how to replace the ‘rag joint’ or, steering coupler, on a 1990 GMT400 pick up truck.