How to Replace Rear Upper Control Arm 97-06 BMW 325Xi

Опубликовано 22 августа 2019, 13:00

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/119/ah/front-control...

In the video, 1A Auto shows how to remove and replace a worn, broken, bent or rusted rear upper control arm. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, BMW 325Xi, and similar E46 3 series vehicles.

🔧 List of tools used:
• Pry Bar 1aau.to/odd/1AXAA00020
• 17mm Wrench 1aau.to/ogt/1AXAA00010
• 18mm Wrench
• 13mm Socket 1aau.to/oBn/1AXAA00015
• 17mm Socket 1aau.to/oBn/1AXAA00015
• 18mm Socket 1aau.to/ohZ/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/oeG/1AXAA00078
• Ratchet 1aau.to/oHZ/1AXAA00016
• Socket Extensions 1aau.to/oBn/1AXAA00015
• Torque Wrench 1aau.to/okd/1AXAA00044
• Pick 1aau.to/odw/1AXAA00037

For More Info visit us at 1aau.to/h/bNe

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.