How to Install Invidia Test Pipes 09-19 Nissan 370Z

Опубликовано 27 апреля 2019, 12:00

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/92/a/CatalyticConver...

In the video 1A Auto shows you how to install test pipes, which is a procedure that removes the catalytic converters. This video applies to the 12 Nissan 370Z

This installation is for off road use only!

🔧 List of tools used:
• 10mm Wrench 1aau.to/ojR/1AXAA00010
• 14mm Wrench 1aau.to/ojR/1AXAA00010
• 10mm Socket 1aau.to/oHG/1AXAA00017
• 14mm Socket 1aau.to/oMP/1AXAA00015
• 15mm Socket 1aau.to/oMP/1AXAA00015
• 8mm Socket 1aau.to/oHG/1AXAA00017
• 1/2 Inch Air Impact Gun 1aau.to/oz/1AXAA00252
• Ratchet 1aau.to/oXX/1AXAA00016
• Socket Extensions 1aau.to/oMP/1AXAA00015
• Swivel
• Anti-Seize Grease
• Floor Jack 1aau.to/onY/1AXAA00068
• Grinder
• Jack Stands 1aau.to/on9/1AXAA00065
• Wire Brush 1aau.to/ocY/1AXAA00079

For More Info visit us at 1aau.to/h/bzS

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.