How to Replace Drivers Side CV Axle 08-13 Nissan Rogue

Опубликовано 13 июля 2018, 20:35

Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACV00166

1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 12 Nissan Rogue

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oajt/1AXAA00013
• Pry Bar 1aau.to/ohA/1AXAA00020
• 18mm Wrench
• 18mm Socket 1aau.to/orR/1AXAA00043
• 21mm Socket 1aau.to/orR/1AXAA00043
• 32mm Socket 1aau.to/oT/1AAST00003
• Ball Joint Press
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/okR/1AXAA00078
• Ratchet 1aau.to/oakK/1AXAA00016
• Socket Extensions 1aau.to/o5W/1AXAA00015
• Torque Wrench 1aau.to/ovD/1AXAA00044
• Copper Anti-Seize
• Rust Penetrant
• Center Punch 1aau.to/ocC/1AXAA00055
• Chisel 1aau.to/ocC/1AXAA00055
• Drain Pan 1aau.to/ogY/1AXAA00320
• Funnel 1aau.to/oc9/1AXAA00310
• Hammer 1aau.to/omf/1AXAA00091
• Wire Brush 1aau.to/oey/1AXAA00079

For More Info visit us at 1aau.to/h/bii

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.