EricTheCarGuy

So this 1997 Nissan Altima came in with a really bad engine noise. At first I thought it was the alternator but it turned out to be something else. You'll have to watch the video to find out what.

**Sponsored Video** First, special thanks to Advance Auto for hooking me up with the bearing for this 2004 Ford Explorer. Here's some useful info from them.

How To Check A Charging System - EricTheCarGuy ericthecarguy.com Well this is by request and is a companion to checking a battery so I think I'll post it as a response to that video.

If you're thinking of building a turbocharged engine, the information in this video will save you a lot of headache and sorrow. It will also save you some money.

How To Tighten Ball Joints That Just Spin - EricTheCarGuy How to tighten ball joints also works with tie rod ends or any other suspension part similar in design.

Visit me at: ericthecarguy.com See Part 1 youtube.com/watch?v=rsGTeWayqIU Vacuum leaks youtube.com/watch?v=9CPqbaSgcok+ Voltage leaks

If you're looking for the most detailed T-5 Manual Transmission Rebuild video, you just found it. Here is Part 1 in the series. Yes, it's that detailed. Link to Part 2: youtube.com/watch?

Visit me at: ericthecarguy.com Part 1: youtu.be/hBzUmtfH6hE Forum discussion about this video

I had recently done a bunch of suspension work and put new tires on my Acura Vigor. Because of that, I decided to make this video about alignments.

Honda Civic Timing Belt Replacement, Quick Look (1998) - EricTheCarGuy ericthecarguy.com Here's one that you don't have to pay for but a good look just the same.

Replacing A Hydroboost Unit - EricTheCarGuy ericthecarguy.com This is actually the first one of these that I replaced, it's a little more complicated than a regular vacuum booster but

Visit me at: ericthecarguy.com Changing Honda manual transmission fluid is not a difficult task in my opinion. I think the hardest part is figuring out how to fill the transmission.

I've had a long standing request to put a webcam in the shop so that viewers can see what goes on in my shop on a work day.

How to Replace Front Struts Part 2 Since this is part 2 I will trust that you saw part one. If not, here is a link to part 1.

This video is a complete guild to Honda ignition coil replacement.

There are a few different methods you can use for tire repair. The method I show in this video is considered the ‘best possible tire repair’. This method is also known as the “Tire Plug/Patch Repair”.

This video shows how to wrap exhaust headers. There are a few different applications of exhaust header wrap, but the principals are pretty much the same and covered in this video.

How to Repair A Stripped Out Aluminum Oil Pan - EricTheCarGuy This happens more often than I like to see. The video covers my feelings just fine.

Visit me at: ericthecarguy.com I really enjoy my new HID headlight kit but during the installation I had a small problem, one of the high beams wasn't working.

This is a quick tip response to my disc brake video. A very observant viewer mentioned this important fact that I forgot to put into the original video so I will correct that here.

1996 Ford F-150 No Start with ScannerDanner-EricTheCarGuy ScannerDanner and EricTheCarGuy are back again this time solving a no start condition on a 1994 Ford F-150.

Check out Kalvinator Engines: kalvinatorengines.com Extended Version of this video available here

This video is a complete step by step guide to replacing the timing belt and water pump on a Honda J series V6 engine found in many Honda vehicles including Accords, Odysseys, Ridgelines, Pilots

While I had the direct injected N14 engine out of my 2007 Mini Cooper S, I decided to remove the intake manifold and inspect the valves.

Visit me at ericthecarguy.com As stated in the video I'm posting this one by popular demand, I had not used my chainsaw in 3 years and I needed to get it started, these are the methods

This video shows how to use Plastigage to check bearing clearances in an engine. Plastigage can be used to check all kinds of clearances, but engine and bearing clearances are among the most common.

Visit me at: ericthecarguy.com This video series covers the major service on the Honda Element and CRV.

Link to full version of this video: ericthecarguy.com/vmanuals/22-vmanual-store/155-2007-chevy-tahoe-53l-engine-replacement-vmanual Link to part 2

Carburetor Rebuild Basics covers the basics of rebuilding a carburetor.

iVTEC How it Works is a long standing requested video. Back with I did the video on the VTEC explanation I was asked about doing a video on iVTEC which is slightly different than VTEC.