EricTheCarGuy

Click here for more info: ericthecarguy.com/vmanuals/22-vmanual-store/67-1990-2002-honda-f-series-timing-belt-replacement-vmanual This video covers the complete timing belt and water

Visit me at: ericthecarguy.com If you're experiencing poor performance, overheating, pinging, or having trouble getting up hills you might want to check to see if you have a restricted

Link to part 2: youtube.com/watch?v=snByNLd65Vo&feature=youtu.be It's true that in some ways this is the worst Subaru timing belt replacement video ever.

I needed to install a trailer brake controller and wire in a 7 way connector to haul a car trailer with my truck, a 1990 C1500.

In this video I get into a misfire and check engine light on this 1997 Nissan Altima. The misfire codes are P0100 MAF sensor, P0325 Knock Sensor, and P0304 Misfire cylinder #4.

Check out Kalvinator Engines: kalvinatorengines.com If you're building a performance engine, degreeing the camshaft is a must.

This is a trick I learned years ago. It will help you if you need to replace wheel cylinders but your brake shoes are still good.

Changing Automatic Transmission Fluid and Filter, 1997 Subaru Legacy (Part 1) - EricTheCarGuy Visit me at: ericthecarguy.com This video is actually a continuation of 'Solving Engine

I read an article recently about a fueling station in California that had accidentally put diesel into their gasoline tanks.

This is Part 2 of the most complete D Series Timing Belt Replacement video on YouTube. It includes the replacement of the timing belt, water pump, cam seal, and drive belts.

The transmission cooler that was installed on my 2003 Honda Pilot was about to cause damage to my AC condenser.

**This video specifically addresses problems with aftermarket fuel systems and does not necessarily represent problems with a stock fuel system.

How To Replace A Window Run Channel ( 97 Honda Accord) - EricTheCarGuy ericthecarguy.com You would normally be doing this if you had an issue with wind noise or a problem with the

Visit me at: ericthecarguy.com This is actually my second Xbox repair video. In the first I repaired the RRD, in this one I tackle the disc read error.

3/8" Tool: $49.00: jbtoolsales.com/tite-reach-tr38v1-3-8-professional-extension-wrench#oid=1002_1 1/4" Tool: $38.00

How to reset an Element's maintenance light is a short video but I've had many customers in the past come to me very worried about what that yellow "maintenance required" light means.

When I got my new TIG welder I was fortunate enough to have Mr. Tig there to show me how it works and how to work it.

This video covers how to install original equipment roof rails on a 2012 Honda Odyssey. However, the information in this video can be used as an overview for roof rail installation on most vehicles.

If you have an engine miss or performance problem, don’t forget to check for a mechanical problem, such as compression loss, with the engine.

Changing Automatic Transmission Fluid and Filter, 1997 Subaru Legacy (Part 2) - EricTheCarGuy Visit me at: ericthecarguy.com Part 1 youtube.com/watch?v=AVhXQti8Qv4 Well

Here's the dramatic conclusion of the Nissan 2.5L timing chain replacement. Well, it's not exactly dramatic because you don't actually get to hear the engine run yet.

This video is a step by step guide in how to replace a power steering rack or gear, on a 2006 Honda Odyssey. This video will apply to more than just the 2006 model year.

This trailing arm bushing repair will apply to: Honda Civics 1989-2000 Honda CRV 1997-2001 Acura Integra 1990-2001 It is very common for the trailing arm bushings on older Honda Civics and Acura

This problem happens often on Hondas, especially with the front lower strut attachment where the fork meets the lower control arm.

If you have an Odyssey that has issues with the doors opening and closing this might be your fix.

This might seem like pretty basic information but it is important and often overlooked. If you have noisy brakes you might want to try this.

Visit me at: ericthecarguy.com Please watch the Re: video before commenting: youtube.com/watch?v=MBbAGqpH0pM I really enjoyed making this video and I LOVE driving my

This is a pretty straightforward repair video. The real trick here is the method. I use a special tool that you can purchase or rent to get the job done.

This video shows you all the steps needed, and provides torque specs, to replace the head gasket on a 1.7L Honda engine.

Visit me at: ericthecarguy.com Some great points were brought up in the comments of the original video including that I was not using my meter to check the resistance of the circuit