Engineering Explained3.91 млн
Опубликовано 8 ноября 2017, 15:00
Rolls Royce Developed A 4 Rotor Diesel Wankel Engine
How Rotary Engines Work - youtu.be/sd6pJtR4PaY
Subscribe for new videos every Wednesday! - goo.gl/VZstk7
Jalopnik Article:
jalopnik.com/this-might-be-the...
It's as crazy as it sounds. Rolls Royce developed a diesel rotary engine for military applications. Because diesel engines require high compression ratios for compression ignition to occur, they used a second rotor to effectively multiply the compression ratio.
From the original Autocar article:
"The first Rolls—Royce development engine was the R1 which was conceived purely as a research tool. With a compressor stage of 1,126 c.c., and a combustion stage of 500 c.c., it produced over 50 bhp and achieved specific fuel consumptions of better than O.5lb/bhp/hour. Among other things, it was used to develop the best inter—porting arrangement between the two stages.
The R2 engine was the alternative three-stage layout, built but not investigated in detail. R3 refers to a combustion stage only, which is being used as a basic unit to build up a range of engines; it has a displacement of 1,216 c.c., and has produced 180 bhp at 4,500 rpm under test conditions.
The remaining engine of which details may be given is the 2—R6. This is a military engine formed of two banks of a two—stage engine. Each high pressure (combustion) stage has a displacement of 1,265 c.c., and is fed by a low-pressure stage of 3,250 c.c. The design power is 350 bhp at 4,500 rpm, for a weight of 939lb-a spectacular power-to-weight ratio for a diesel."
Don't forget to check out my other pages below!
Facebook: facebook.com/engineeringexplai...
Official Website: howdoesacarwork.com
Twitter: twitter.com/jasonfenske13
Instagram: instagram.com/engineeringexpla...
Car Throttle: carthrottle.com/user/engineeri...
EE Extra: youtube.com/channel/UCsrY4q8xG...
NEW VIDEO EVERY WEDNESDAY!
How Rotary Engines Work - youtu.be/sd6pJtR4PaY
Subscribe for new videos every Wednesday! - goo.gl/VZstk7
Jalopnik Article:
jalopnik.com/this-might-be-the...
It's as crazy as it sounds. Rolls Royce developed a diesel rotary engine for military applications. Because diesel engines require high compression ratios for compression ignition to occur, they used a second rotor to effectively multiply the compression ratio.
From the original Autocar article:
"The first Rolls—Royce development engine was the R1 which was conceived purely as a research tool. With a compressor stage of 1,126 c.c., and a combustion stage of 500 c.c., it produced over 50 bhp and achieved specific fuel consumptions of better than O.5lb/bhp/hour. Among other things, it was used to develop the best inter—porting arrangement between the two stages.
The R2 engine was the alternative three-stage layout, built but not investigated in detail. R3 refers to a combustion stage only, which is being used as a basic unit to build up a range of engines; it has a displacement of 1,216 c.c., and has produced 180 bhp at 4,500 rpm under test conditions.
The remaining engine of which details may be given is the 2—R6. This is a military engine formed of two banks of a two—stage engine. Each high pressure (combustion) stage has a displacement of 1,265 c.c., and is fed by a low-pressure stage of 3,250 c.c. The design power is 350 bhp at 4,500 rpm, for a weight of 939lb-a spectacular power-to-weight ratio for a diesel."
Don't forget to check out my other pages below!
Facebook: facebook.com/engineeringexplai...
Official Website: howdoesacarwork.com
Twitter: twitter.com/jasonfenske13
Instagram: instagram.com/engineeringexpla...
Car Throttle: carthrottle.com/user/engineeri...
EE Extra: youtube.com/channel/UCsrY4q8xG...
NEW VIDEO EVERY WEDNESDAY!
Свежие видео