What Happens To An Engine Without Oil?
5 965 645
55.3
Engineering Explained3.9 млн
Следующее
09.04.17 – 1 057 18112:15Популярные
277 дней – 771 98926:26
12.11.21 – 310 28116:02Опубликовано 5 апреля 2017, 14:00
What happens if your car runs out of engine oil?
Watching Cars Warm Up In Infrared - youtu.be/n_CQzBc6GbM
Subscribe for new videos every Wednesday! - goo.gl/VZstk7
Watch A Mercedes Run With No Oil On A Track (Car Throttle)
youtu.be/CfipRXooCTM
Products Used:
FLIR T1K Camera - amzn.to/2mgV8XS
Affordable Thermal Camera - amzn.to/2j2gnNh
in this video we’re going to be discussing what happens when an engine has no oil. As a demonstration, we’ll be viewing an engine with and without oil running. This is the exact same engine on the left and the right, on the left with oil, and on the right without. Both engines will start at the exact same time, but the video on the right was filmed 24 hours after the video on the left, allowing for the engine to completely cool. This is a 212 cc air-cooled single-cylinder Harbor Freight engine.
There are five points we’re monitoring on each engine. Point one is the crankcase, below the level at which oil will rest. Point two is the top of the crankcase, where there obviously won’t be any oil resting near. Point three is the air-cooled cylinder bore. Point four is the exhaust pipe exiting the cylinder before entering the muffler, and point 5 is the valve cover. This is a pushrod style valve train with overhead valves.
Opening the crankcase reveals the permanent damage which occurred. First of all, look at the small amount of oil that didn’t quite make it out while draining. It’s quite dark, and this is after a 15 minute run with oil, and 15 minutes without, in a brand new engine. The oil which remained in the drained engine is clearly quite dirty, and actually it has quite a bit of metal content in it, as you can see reflecting as I move around the towel.
Examining further, I removed the connecting rod cap from the crankshaft. This is the bearing the crank rotates on. You can see the scored, less reflective surface of the cap. Indeed, you can see the scratches on the crankshaft as well. I would expect to see similar issues with the camshaft and cylinder bore as well.
Engineering Explained is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Don't forget to check out my other pages below!
Facebook: facebook.com/engineeringexplai...
Official Website: howdoesacarwork.com
Twitter: twitter.com/jasonfenske13
Instagram: instagram.com/engineeringexpla...
Car Throttle: carthrottle.com/user/engineeri...
EE Extra: youtube.com/channel/UCsrY4q8xG...
NEW VIDEO EVERY WEDNESDAY!
Watching Cars Warm Up In Infrared - youtu.be/n_CQzBc6GbM
Subscribe for new videos every Wednesday! - goo.gl/VZstk7
Watch A Mercedes Run With No Oil On A Track (Car Throttle)
youtu.be/CfipRXooCTM
Products Used:
FLIR T1K Camera - amzn.to/2mgV8XS
Affordable Thermal Camera - amzn.to/2j2gnNh
in this video we’re going to be discussing what happens when an engine has no oil. As a demonstration, we’ll be viewing an engine with and without oil running. This is the exact same engine on the left and the right, on the left with oil, and on the right without. Both engines will start at the exact same time, but the video on the right was filmed 24 hours after the video on the left, allowing for the engine to completely cool. This is a 212 cc air-cooled single-cylinder Harbor Freight engine.
There are five points we’re monitoring on each engine. Point one is the crankcase, below the level at which oil will rest. Point two is the top of the crankcase, where there obviously won’t be any oil resting near. Point three is the air-cooled cylinder bore. Point four is the exhaust pipe exiting the cylinder before entering the muffler, and point 5 is the valve cover. This is a pushrod style valve train with overhead valves.
Opening the crankcase reveals the permanent damage which occurred. First of all, look at the small amount of oil that didn’t quite make it out while draining. It’s quite dark, and this is after a 15 minute run with oil, and 15 minutes without, in a brand new engine. The oil which remained in the drained engine is clearly quite dirty, and actually it has quite a bit of metal content in it, as you can see reflecting as I move around the towel.
Examining further, I removed the connecting rod cap from the crankshaft. This is the bearing the crank rotates on. You can see the scored, less reflective surface of the cap. Indeed, you can see the scratches on the crankshaft as well. I would expect to see similar issues with the camshaft and cylinder bore as well.
Engineering Explained is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Don't forget to check out my other pages below!
Facebook: facebook.com/engineeringexplai...
Official Website: howdoesacarwork.com
Twitter: twitter.com/jasonfenske13
Instagram: instagram.com/engineeringexpla...
Car Throttle: carthrottle.com/user/engineeri...
EE Extra: youtube.com/channel/UCsrY4q8xG...
NEW VIDEO EVERY WEDNESDAY!
Свежие видео
7 дней – 104 08310:52
12 дней – 136 92614:34
16 дней – 66 11712:54
17 дней – 122 32528:03
18 дней – 157 0300:44
Случайные видео
233 дня – 85 2445:04
300 дней – 388 11612:24
30.10.23 – 523 05929:45
05.04.23 – 621 8142:49
27.10.22 – 166 99411:08
27.06.22 – 284 87817:18
2 дня – 79 58815:42
2 дня – 20 17632:20
2 дня – 101 63910:38
4 дня – 363 12529:02
4 дня – 1 7041:00
12 дней – 6 11214:12
19 дней – 83 9900:58
2 дня – 55 86119:23
3 дня – 72 53632:06