How to Replace Rear ABS Sensor 10-14 Subaru Outback

Опубликовано 8 июня 2019, 13:00

For More Info visit us at: 1aau.to/h/bFK

In the video, 1A Auto shows how to remove and replace a broken, worn, or failed ABS sensor. The video is applicable to the 10, 11, 12, 13, 14, Subaru Outback

This process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oat/1AXAA00013
• 10mm Socket 1aau.to/oac/1AXAA00017
• 19mm Socket 1aau.to/oQ/1AXAA00043
• Plastic Fastener Remover 1aau.to/ob/1AXAA00290
• 1/2 Inch Breaker Bar 1aau.to/og/1AXAA00078
• Ratchet 1aau.to/oaG/1AXAA00016
• Socket Extensions 1aau.to/oaj/1AXAA00015
• Torque Wrench 1aau.to/o7/1AXAA00044
• Rust Penetrant

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Subaru Outback 2010-2014 4th Gen: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/bFK

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.