How to Replace a Transmission Mount on a 2003-08 Mazda 6

Опубликовано 1 октября 2018, 14:38

Buy Now!
New Transmission Mount from 1AAuto.com 1aau.to/ia/1ATMT00112

1A Auto shows you how to remove, install, change or replace a broken or worn out transmission mount. This video is applicable to the 03, 04, 05, 06, 07, 08 Mazda 6.

🔧 List of tools used:
• 10mm Socket 1aau.to/oJ5/1AXAA00017
• 15mm Socket 1aau.to/oQm/1AXAA00015
• 17mm Socket 1aau.to/oQm/1AXAA00015
• Needle nose pliers 1aau.to/oit/1AXAA00051
• Needle nose pliers 1aau.to/oit/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/ohU/1AXAA00078
• Torque Wrench 1aau.to/oqC/1AXAA00044
• Rust Penetrant
• Floor Jack 1aau.to/ooY/1AXAA00068
• Hammer 1aau.to/oie/1AXAA00091
• Jack Stands 1aau.to/opc/1AXAA00065

For More Info visit us at 1aau.to/h/aLu

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.