How to Replace Knock Sensor on a 2003-08 Mazda 6 L4 2.3L (Excluding Turbo Models)

Опубликовано 28 сентября 2018, 19:21

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/180/c/knock-sensor

1A Auto Shows you how to install, repair, fix, change or replace a bad or broken knock sensor harness. This video is applicable to the 03, 04, 05, 06, 07, 08 Mazda 6 L4 2.3L (Excluding Turbo Models)

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/owg/1AXAA00013
• 10mm Socket 1aau.to/opu/1AXAA00017
• 8mm Socket 1aau.to/opu/1AXAA00017
• Needle nose pliers 1aau.to/ocV/1AXAA00051
• Needle nose pliers 1aau.to/ocV/1AXAA00052
• Ratchet 1aau.to/owC/1AXAA00016
• Socket Extensions 1aau.to/or3/1AXAA00015
• Torque Wrench 1aau.to/ogz/1AXAA00044
• Soft-Bristle Brush 1aau.to/oaL/1AXAA00079
• Throttle Body Cleaner
• Drain Pan 1aau.to/obD/1AXAA00320

For More Info visit us at 1aau.to/h/Vp

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.