How to Replace Multifunction Switch 95-99 GMC K1500

Опубликовано 24 февраля 2017, 13:08

Buy Now!
New Windshield Wiper Switch from 1AAuto.com 1aau.to/ib/1AZCC00007

1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty multifunction/turn signal stalk, high beam and wiper switch. This video is applicable to the 95, 96, 97, 98, 99 GMC Sierra

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o8N/1AXAA00013
• 8mm Wrench 1aau.to/oce/1AXAA00011
• 10mm Socket 1aau.to/oPv/1AXAA00017
• 21mm Socket 1aau.to/opi/1AXAA00043
• 7mm Socket 1aau.to/oPv/1AXAA00017
• Steering wheel puller
• Side Cutters
• Snap Ring Pliers
• E5 Socket
• T25 Driver 1aau.to/opj/1AXAA00008
• 1/2 Inch Breaker Bar 1aau.to/ojg/1AXAA00078
• Torque Wrench 1aau.to/osX/1AXAA00044
• Pick 1aau.to/ogH/1AXAA00037

For More Info visit us at 1aau.to/h/aX4

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.