How to Replace Steering Column Control Module 05-10 Chrysler 300

Опубликовано 1 февраля 2017, 15:46

For More Info visit us at: 1aau.to/h/95

In this video, 1A Auto shows how to replace the steering column control module on a 05, 06, 07, 08, 09, 10 Chrysler 300.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oQm/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oQm/1AXAA00013
• 10mm Socket 1aau.to/oJf/1AXAA00017
• T10 Torx Driver 1aau.to/oi5/1AXAA00008
• Ratchet 1aau.to/oTM/1AXAA00016
• Socket Extensions 1aau.to/oPQ/1AXAA00015
• Torque Wrench 1aau.to/ozU/1AXAA00044
• Gloves 1aau.to/oga/1AXSS00048
• Wire Ties
• 10mm Allen Wrench 1aau.to/oan/1AXAA00007

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Chrysler 300 2005-10 1st Gen: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/95

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.