How to Replace Inner Tie Rod Boots 05-10 Chrysler 300

Опубликовано 23 января 2017, 22:54

In the video, 1A Auto shows how to replace a worn, torn, or rotted inner tie rod boot. The video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300.

🔧 List of tools used:
• 20mm Wrench
• 21mm wrench
• 22mm Wrench
• 24mm Wrench
• Complete Metric Socket Set 1aau.to/osb/1AXAA00043
• Side Cutters
• Slip-Joint Pliers
• Wire End Cutters
• 1/2 Inch Breaker Bar 1aau.to/ok3/1AXAA00078
• Ratchet 1aau.to/oanm/1AXAA00016
• Socket Extensions 1aau.to/o7b/1AXAA00015
• Torque Wrench 1aau.to/ov5/1AXAA00044
• Gloves 1aau.to/od6/1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses 1aau.to/oak/1AXAA00343
• Floor Jack 1aau.to/ouo/1AXAA00068
• Hammer 1aau.to/omq/1AXAA00091
• Jack Stands 1aau.to/ouD/1AXAA00065

For More Info visit us at 1aau.to/h/bkA

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.