How to Replace Spindle 02-08 Dodge Ram 1500

Опубликовано 25 июля 2016, 12:15

In this video, 1A Auto shows you how to remove and replace the spindle. This video is applicable to the 2008 Dodge Ram 1500

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oXQ/1AXAA00013
• Pry Bar 1aau.to/oe8/1AXAA00020
• 18mm Socket 1aau.to/omE/1AXAA00043
• 21mm Socket 1aau.to/omE/1AXAA00043
• 22mm Socket 1aau.to/obr/1AXAA00266
• 35mm Socket 1aau.to/oD/1AAST00005
• Needle nose pliers 1aau.to/ohT/1AXAA00051
• Needle nose pliers 1aau.to/ohT/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/ohp/1AXAA00078
• Ratchet 1aau.to/oYX/1AXAA00016
• Socket Extensions 1aau.to/oNC/1AXAA00015
• Torque Wrench 1aau.to/opQ/1AXAA00044
• Bungee Cord
• Floor Jack 1aau.to/ook/1AXAA00068
• Hammer 1aau.to/ohK/1AXAA00091
• Jack Stands 1aau.to/oou/1AXAA00065
• Small Hook

For More Info visit us at 1aau.to/h/aHz

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.