How to Replace Front Sway Bar Link 03-05 Honda Pilot

Опубликовано 9 июня 2015, 13:59

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASSL00072

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 03, 04, 05 Honda Pilot and Acura MDX

🔧 List of tools used:
• 17mm Wrench 1aau.to/onz/1AXAA00010
• 19mm Wrench 1aau.to/onz/1AXAA00010
• 17mm Socket 1aau.to/oWj/1AXAA00015
• 19mm Socket 1aau.to/opy/1AXAA00043
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oaaR/1AXAA00016
• Torque Wrench 1aau.to/otc/1AXAA00044
• Rust Penetrant
• Floor Jack 1aau.to/orq/1AXAA00068
• Jack Stands 1aau.to/orD/1AXAA00065
• Wire Brush 1aau.to/odW/1AXAA00079

For More Info visit us at 1aau.to/h/aZg

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.