How to Replace Axle Disconnect Housing 02-09 GMC Envoy XL

Опубликовано 30 августа 2014, 18:28

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/264/a/4wd-axle-actua...

1A Auto shows you how to repair, install, fix, change or replace a failing, defective, or corroded 4WD front disconnect housing. This video is applicable to the 02, 03, 04, 05, 06, 07, 08, 09 GMC Envoy, or Chevy Trailblazer

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oP4/1AXAA00013
• Pry Bar 1aau.to/oed/1AXAA00020
• 15mm Wrench 1aau.to/oip/1AXAA00010
• 18mm Wrench
• 10mm Socket 1aau.to/oCr/1AXAA00017
• 15mm Socket 1aau.to/oHt/1AXAA00015
• 17mm Socket 1aau.to/oHt/1AXAA00015
• 19mm Socket 1aau.to/ojN/1AXAA00043
• 8mm Socket 1aau.to/oCr/1AXAA00017
• Wire Cutters
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oQN/1AXAA00016
• Swivel
• Torque Wrench 1aau.to/onx/1AXAA00044
• White Grease
• Wire Ties
• Floor Jack 1aau.to/okM/1AXAA00068
• Hammer 1aau.to/ogo/1AXAA00091
• Jack Stands 1aau.to/okN/1AXAA00065

For More Info visit us at 1aau.to/h/auH

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.