How to Replace Tie Rod Assembly 98-04 Nissan Frontier

Опубликовано 22 октября 2013, 17:50

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/184/s/tie-rods-and-a...

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the Nissan Frontier and Xterra, model years 98, 99, 00, 01, 02, 03, and 04.

🔧 List of tools used:
• 22mm Wrench
• 21mm Socket 1aau.to/ofa/1AXAA00043
• 22mm Socket 1aau.to/oai/1AXAA00266
• Needle nose pliers 1aau.to/oc6/1AXAA00051
• Needle nose pliers 1aau.to/oc6/1AXAA00052
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oxp/1AXAA00016
• Torque Wrench 1aau.to/ogP/1AXAA00044
• Center Punch 1aau.to/oah/1AXAA00055
• Floor Jack 1aau.to/ofJ/1AXAA00068
• Hammer 1aau.to/oc3/1AXAA00091
• Jack Stands 1aau.to/ofQ/1AXAA00065

For More Info visit us at 1aau.to/h/WK

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.