Boost Control for Cars That Need More Traction - Jay's Tech Tips
60 760
15.4
That Racing Channel1.65 млн
Следующее
07.11.15 – 91 7282:41Популярные
21 день – 89 24936:16
27.12.22 – 230 06111:41Опубликовано 23 октября 2015, 14:00
If you are trying to make a lot of power in a 2wd boosted vehicle, you have probably encountered the problem where you can't run low enough boost to have traction in first gear, AND run high enough boost to make the power you want in higher gears because of the limitations of the wastegate spring. A 10psi wastegate spring will allow you to make as little as 10psi, but will struggle to make much more than a maximum of 20psi (100% increase). If you are trying to make 40psi in 4th, the smallest gate spring you would want to use is 20psi, but then that prevents you from getting the boost down to 10psi in 1st for traction. Well today we discuss how to use a 4 port boost control solenoid to solve this problem and have low boost in low gears and high boost in high gears without being held to the normal limitations of the wastegate spring.
Свежие видео
7 дней – 1 223 8891:00
7 дней – 23 42226:02
9 дней – 00:00
9 дней – 6 5696:28
14 дней – 5 1818:19
14 дней – 4870:53Случайные видео
30 дней – 824 47017:10
45 дней – 20 8913:12
201 день – 977 01415:14
12.11.23 – 1 108 85619:56
07.06.23 – 531 52911:04
28.09.13 – 227 35921:00
3 дня – 6420:52
7 дней – 307 3990:22
8 дней – 312 8068:43
16 дней – 262 15516:22
21 день – 1 324 67417:03
23 дня – 2 8730:41
23 дня – 78 6250:46
3 дня – 104 6300:37