How to Replace Rear Sway Bar Link 07-14 Toyota FJ Cruiser

Опубликовано 17 июля 2019, 13:00

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ib/1ASFK04392

In this video, 1A Auto shows how to remove a rusted, broken, or bent rear sway bar link. The video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, Toyota FJ Cruiser

🔧 List of tools used:
• Pry Bar 1aau.to/ogZ/1AXAA00020
• 13mm Wrench 1aau.to/ooT/1AXAA00010
• 14mm Wrench 1aau.to/ooT/1AXAA00010
• 17mm Wrench 1aau.to/ooT/1AXAA00010
• 18mm Wrench
• 21mm Socket 1aau.to/oqK/1AXAA00043
• Cutoff Wheel 1aau.to/od/1AXAA00254
• Locking Pliers 1aau.to/oa7/1AXAA00139
• 1/2 Inch Breaker Bar 1aau.to/oj9/1AXAA00078
• Torque Wrench 1aau.to/ouv/1AXAA00044
• Rust Penetrant
• Silicone Paste
• Floor Jack 1aau.to/osG/1AXAA00068
• Hammer 1aau.to/oku/1AXAA00091
• Jack Stands 1aau.to/osU/1AXAA00065

For More Info visit us at 1aau.to/h/bJq

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.