How to Replace Front Sway Bar Links 02-07 Mazda 6

Опубликовано 3 октября 2018, 14:49

Buy Now!
New Sway Bar Link Set from 1AAuto.com 1aau.to/ia/1ASFK02048

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 07 Mazda 6.

This repair was done on a 2007 Mazda 6 i 2.3L and the process should be similar on the following vehicles:
2003 Mazda 6
2004 Mazda 6
2005 Mazda 6
2006 Mazda 6
2007 Mazda 6
2008 Mazda 6

🔧 List of tools used:
• 14mm Wrench 1aau.to/og/1AXAA00010
• 16mm Wrench
• 14mm Socket 1aau.to/oB/1AXAA00015
• 15mm Socket 1aau.to/oB/1AXAA00015
• 21mm Socket
• 1/2 Inch Breaker Bar 1aau.to/oc/1AXAA00078
• Ratchet 1aau.to/oN/1AXAA00016
• Socket Extensions 1aau.to/oB/1AXAA00015
• Torque Wrench 1aau.to/ox/1AXAA00044
• 5mm Hex Wrench

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Mazda 6 2002-2007 1st gen GG1: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/T

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.