How to Replace Rear Brake Caliper 07-11 Honda CR-V

Опубликовано 23 июля 2018, 19:37

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/79/f/brake-calipers

In the video, 1A Auto shows how to replace a stuck or rusted rear brake caliper. The video is applicable to the 09 Honda CR-V.

This repair was done on a 2009 Honda CR-V and the process should be similar on the following vehicles:
2007 Honda CR-V
2008 Honda CR-V
2009 Honda CR-V
2010 Honda CR-V
2011 Honda CR-V

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oVT/1AXAA00013
• Pry Bar 1aau.to/ooD/1AXAA00020
• 10mm Wrench 1aau.to/opk/1AXAA00010
• 17mm Wrench 1aau.to/opk/1AXAA00010
• 12mm Socket 1aau.to/oVE/1AXAA00015
• 17mm Socket 1aau.to/oVE/1AXAA00015
• 19mm Socket
• 1/2 Inch Breaker Bar 1aau.to/ofy/1AXAA00078
• Ratchet 1aau.to/o2f/1AXAA00016
• Socket Extensions 1aau.to/oVE/1AXAA00015
• Bungee Cord

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Honda CR-V 2007-2011 3rd Gen: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/ag4

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.