How to Replace Upper Control Arms 05-17 Chrysler 300

Опубликовано 19 января 2017, 21:07

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASFU00139

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking upper control arms. This video is applicable to the 2008 Chrysler 300.

🔧 List of tools used:
• 18mm Wrench
• 18mm Socket 1aau.to/or4/1AXAA00043
• 19mm Socket 1aau.to/or4/1AXAA00043
• 21mm Socket 1aau.to/or4/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/okY/1AXAA00078
• Ratchet 1aau.to/oamA/1AXAA00016
• Socket Extensions 1aau.to/o6D/1AXAA00015
• Torque Wrench 1aau.to/ovT/1AXAA00044
• Bungee Cord
• Gloves 1aau.to/od3/1AXSS00048
• Floor Jack 1aau.to/oue/1AXAA00068
• Hammer 1aau.to/omk/1AXAA00091
• Jack Stands 1aau.to/out/1AXAA00065

For More Info visit us at 1aau.to/h/bju

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.