How to Replace Ball Joint 03-06 GMC Envoy XL

Опубликовано 8 сентября 2014, 13:36

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00127
New Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASFK00729

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 02, 03, 04, 05, 06, 07, 08, 09 GMC Envoy or Chevy Trailblazer.

This repair was done on a 2003 GMC Envoy XL and the process should be similar on the following vehicles:
2002 GMC Envoy XL
2003 GMC Envoy XL
2004 GMC Envoy XL
2005 GMC Envoy XL
2006 GMC Envoy XL

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oYn/1AXAA00013
• Pry Bar 1aau.to/opj/1AXAA00020
• 10mm Wrench 1aau.to/oqg/1AXAA00010
• 15mm Wrench 1aau.to/oqg/1AXAA00010
• 10mm Socket 1aau.to/oQ8/1AXAA00017
• 15mm Socket 1aau.to/oXW/1AXAA00015
• 19mm Socket
• Ball Joint Press
• Grease Gun
• Wire Cutters
• Ratchet 1aau.to/o45/1AXAA00016
• Torque Wrench 1aau.to/oEX/1AXAA00044
• Bearing Grease
• Rust Penetrant
• Wire Ties
• Floor Jack 1aau.to/orK/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oqe/1AXAA00065
• Razor Blade / Gasket Scraper

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
GMC Envoy 2002-2009 2nd Gen: youtube.com/playlist?list=PL37...
Chevy Auto Repair Videos: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/aj5

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.