How to Replace Rear Wheel Seals 2009-2011 Ford F-150

6 362
1A Auto2.41M
Published on 20 Nov 2023, 17:12
Buy Now!
New Wheel Seal from

This video shows you how to install a new seal on your 2009-2011 Ford F-150. This seal is for the end of a solid axle tube, to keep gear oil in, and the elements out. A leaking seal could lead to considerable damage to your differential. Or, if you needed to remove an axle, or a bearing, or do maintenance on a differential, you should install a new seal when you put things back together.

This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

🔧 List of tools used:
• Flat Blade Screwdriver
• Pry Bar
• 10mm Wrench
• 10mm Socket
• 13mm Socket
• 21mm Socket
• Bearing Race and Seal Driver
• Needle Nose Locking Pliers
• 3/8 Inch Socket
• T30 Socket
• 3/8 Inch Drive Ratchet
• Ratchet
• Torque Wrench
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags
• Copper Anti-Seize
• Gear Oil
• Gloves
• Liquid Thread Locker
• Petroleum Jelly
• Rust Penetrant
• Safety Glasses
• Drain Pan
• Floor Jack
• Hammer
• Jack Stands
• Large C-Clamp
• Magnet - Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
• Wire Brush


For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.