EricTheCarGuy

Previous video in the series: youtube.com/watch?v=xdubsr2dSNg It became clear after talking with the engineers at Maximum Motorsports that my rear suspension wasn't going to hold up to

Broken outer door handles on 1996-2004 Acura/Honda RL's is a common problem. This video shows you all the steps on how to replace the outer door handle on your RL if you have a broken one.

Here's a link to (Part 1) in case you missed it: youtube.com/watch?v=6vqeClRXTP4 Link to previous video in the #FairmontProject series: youtube.com/watch?v=PRz536ysSv0 Link

Previous video in the series: youtube.com/watch?v=PRz536ysSv0 Link to part 2: youtube.com/watch?v=xdubsr2dSNg Link to full version of video

This video is a complete guide to replacing the thermostat on your Honda Element or CRV with a K series engine. Space is limited and it can be difficult to access the part. Rust can also be a factor.

Some have questioned my choice of going with a carburetor for my #FairmontProject engine, #DarkMatterPikachu. In this video I talk about what makes my Demon carburetor special.

Previous video in the series: youtube.com/watch?v=CtCb7wizPak This is the second installment of the Final Fitting stage of the #FairmontProject.

Thank you for watching this live show. Sorry if I messed up some of your names. Here is what I hope will be useful info for you. If I didn't get to your question I apologize.

Previous video in the series: youtube.com/watch?v=PbsLo1EXjU0 In this installment I work on installing the reverse rotation water pump, the carburetor, the alternator, heater hose

You may be familiar with the term, but not necessarily the process. This video not only shows what clocking a turbo means, it also shows how to do it.

This video is NOT meant to be an endorsement of altering the headlights in your vehicle. It's just meant to be a comparison between the Halogen, HID, and LED bulbs that are available now.

Thank you for watching this live show. Sorry if I messed up some of your names. I had a really hard time during this one for some reason. Here is what I hope will be useful info for you.

Previous video in the series: youtube.com/watch?v=17bfwKUxpmY Now that the engine and transmission have been mounted in the car, it's time to start fitting things together.

This video has been compensated by Collective Bias, Inc. and its advertiser. All opinions are mine alone.

This video shows the diagnosis and replacement of an alternator on a 1998 Ford Counter. I believe it's called a Mondeo in the UK. It's tricky business.

Thank you for watching this live show. Sorry if I messed up some of your names. Here is what I hope will be useful info for you. If I didn't get to your question I apologize.

Here's a link to the previous video in the series: youtube.com/watch?v=TY-Ad71bQu4 I can't stress enough how this is just a 'test fit' of the engine, transmission, driveshaft, and a

Here's a link to the video where I relocated the battery (it's also the previous video in the series): youtube.com/watch?v=IF8cHIjmUY8 If you need to know how to remove and replace a

Sorry about the audio. I’ll see if I can sort that out. Thank you for watching this live show. Sorry if I messed up some of your names. Here is what I hope will be useful info for you.

How To Install Front Lower Control Arms and Outer Tie Rods 1998 Mazda 626 pretty much sums it up. The reason I'm replacing these parts on this car is because of some collision damage.

Since my turbo is taking up the space that used to be occupied by my battery, I needed to move it.

Happy New Year! Thank you for watching this live show. Sorry if I messed up some of your names. Here is what I hope will be useful info for you. If I didn't get to your question I apologize.

This was one of my favorite parts of the #FairmontProject so far, fabricating the parking brake cables.

Stopping is just as important than going in a performance car. For the #FairmontProject, I went with brakes that were part of a 5 lug conversion.

It's not the sexiest, or the longest ETCG video about my #FairmontProject, but if you want to carve corners, you need a good stabilizer bar.

With any vehicle, the ability to steer the vehicle where you want it to go is important.

In this video I show all the steps needed to install front coil springs and struts into a Ford Fox body.

Here is the full version of #DarkMatterPikachu on the dyno. If you want to skip to the good part, here's the video.

Check out Kalvinator Engines: kalvinatorengines.com If you're building a performance engine, degreeing the camshaft is a must.

Check out Kalvinator Engines: kalvinatorengines.com After all the preparation of balancing, checking clearances, and painting, it's now time to assemble my engine.