Maker Tech: DIY terms to know

Опубликовано 5 мая 2020, 22:01

We're celebrating Makers in the month of May on Newegg Studios, and to kick things off we're covering the basics. What is a "Maker" anyway? Do people still use 3D printers? Why is "STEM" such a big deal? We answer these questions in more in our introduction to Maker culture, covering the wide world of DIY hobbyists beyond our normal PC builder pals.

Note: A previously published version of this video contained some factual mistakes that have been corrected. That original video has been removed.

Check out all Maker products on Newegg: newegg.io/2a69d00

Follow Newegg

Facebook: facebook.com/Newegg
Twitter: twitter.com/newegg
Instagram: instagram.com/newegg
Twitch: twitch.tv/newegg
Mixer: mixer.com/newegg
Discord: discordapp.com/invite/2FVvmh3

Shop our site: newegg.io/ff64bbf
Shop global: newegg.io/d0dd56d
Get exclusive email discounts: newegg.io/f0eccf6

More Hardware and Gaming Content

Newegg Insider: newegg.io/ef91026
GameCrate: newegg.io/4f30146

#RaspberryPi
#STEM
#Arduino
----
Legal:

Newegg Inc. provides the information contained herein as an educational service. Although we believe the information in this presentation to be accurate and timely, because of the rapid changes in the industry and our reliance on information provided by outside sources, we make no warranty or guarantee concerning the accuracy or reliability of the content or other material which we may reference. This presentation is provided on an "as is" basis without warranties of any kind, expressed or implied, including but not limited to warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose. This video/audio file is the property of Newegg Inc. Newegg Inc. grants permission to distribute, rebroadcast or copy this file, provided that (1) the below copyright notice appears in all copies (2) is for non-commercial use only and (3) is not modified in any way. Copyright © 2019 Newegg Inc. All rights reserved.