Skyline R32 Gtr 3.2L Stroker First Full Pulls! Awd Rb30 Sequential (Boost Hits Hard!)

Опубликовано 3 декабря 2020, 2:05

On this episode of the TRC R32 GTR build series we take a night cruise to make full pulls for the first time! The car is an absolute dream come true and so much fun to drive, we took the car through its paces dialing in the tune on base conservative timing/RPM limit. The car was actually making much more boost than we anticipated but we decided to let it eat anyway on the higher boost setting, it was definitely a fun ride. We finished fabrication of the full 4" exhaust system and it sounds sweet! We also completed modifications to the factory valve covers to help with hood fitment and updated the internal baffling system.

TRC R32 Build List:
1991 Nissan Skyline R32 GTR
RB30 Spool Imports 3.2L Stroker (CP Pistons/Spool race rods)
RIPS Racing extended capacity oil sump
PRP RB30 AWD Wet Sump Block Brace
RB26 Head porting solutions race port (ferrera valvetrain)
Kelford 274 cams (182-S)
PPG Sequential Transmission (6speed)
OS Giken Quad plate clutch (R4C)
OS Giken 1.5 Way Front LSD
PRP CAM & Crank trigger kits w/CAS bracket
Hypertune Intake Manifold w/ Drive by Wire TB (dual rail for 12 injectors)
Hypertune exhaust manifold (with EGT bung)
Hypertune Race Intercooler
PTE 7685 Gen 2 Turbo
Dual Turbosmart gen 5 wastegates
Turbosmart BOV
PRP RB R35 VR38 COIL BRACKET KIT
PHR Triple Walbro Fuel Pump Hanger (3 walbro hellcat pumps)
12 ID1300 Injectors
Peterson external oil pressure regulator
Spool head oil drain kit
Spool RB Crank Spline Collar
Spool Billet spline drive oil pump gear
Custom Chase bays power steering reservoir
Custom Engine Harness
powder coating by "JETT powder coating"
Custom aluminum driveshaft
Koyo Radiator