What Happened to #ETCGDadsTruck Engine?

Опубликовано 28 февраля 2020, 10:11

Those of you that have followed the #ETCGdadsTruck build know that I had some difficulties just after breaking in the freshly rebuilt engine. Aside from the pinging, there seemed to be excessive blow by causing massive oil leaks on the engine.

In this video I remove the engine and tear it down to find out the cause of these problems. You might be shocked at what I find since I’ve put about 1500 miles on the truck since it was built last year. It’s amazing it ran as well as it did.

Let me know what you think went wrong in the comments.

This is (Episode 32) in the #ETCGDadsTruck series.

Episode 33: youtu.be/HTBZQAh-FbY

My Patreon Account: patreon.com/EricTheCarGuy

The best place for answers to your automotive questions: ericthecarguy.com

Check out the ETCG Blog for the latest info: ericthecarguy.com/blog

Check out my ETCG1 channel: youtube.com/user/ETCG1?sub_con...

Thanks for watching!

Links

Compression Ratio Calculator: rbracing-rsr.com/compstaticcal...

My Specs: Bore: 4.030, Stroke 3.75, Head gasket compressed .041, Deck Height 0, Piston volume +5.00cc, Head cc: 65cc

My engine parts

Crankshaft: summitracing.com/parts/esp-103...

Rods: summitracing.com/parts/sca-257...

Pistons: summitracing.com/parts/slp-h86...

Piston Rings: summitracing.com/parts/slp-e-2...

AFR Cylinder Heads: summitracing.com/parts/afr-091...

Head Gasket: summitracing.com/parts/fel-100...

Edelbrock Pro Flo 4 EFI: summitracing.com/parts/edl-357...

Lokar Dipstick: summitracing.com/parts/lok-ed-...

Related Videos

Last Minute Prep and Problems #ETCGDadsTruck: youtu.be/u0mBrFVET5Q

#ETCGDadsTruck Build Introduction: youtube.com/watch?v=kCepnacqRu...

Machine Shop Summary #ETCGDadsTruck Engine: youtube.com/watch?v=HvVw2MKdUz...

Octane Ratings and What They Mean: youtube.com/watch?v=8VWEwEveGT...

What Caused the Dipstick To Blow Out #ETCGDadsTruck: youtube.com/watch?v=e-6VffhVf3

What is Detonation and How Can It Kill Your Engine: youtube.com/watch?v=BI5AmEPV4X...

383 Stroker Engine Parts #ETCGDadsTruck: youtu.be/sygI3OA4rfA

383 Rotating Assembly: youtube.com/watch?v=g_dPAptfxn...

383 Top End Assembly: youtube.com/watch?v=h7qowMqZXR...

Final Assembly 383: youtube.com/watch?v=H-PNL-x1dU...

#ETCGDadsTruck Starts For the First Time: youtube.com/watch?v=e5bDArrWvn...

What Really Happened to the #FairmontProject Engine? Eric Comes Clean: youtube.com/watch?v=1Dr5PvrdAl...

#ETCGDadsTruck Playlist: youtube.com/watch?v=kCepnacqRu...

The #FairmontProject Playlist: youtube.com/watch?v=L22GsHQi7t...

**Answers to your automotive questions found here: ericthecarguy.com/faq

Social Network Links

Facebook: facebook.com/EricTheCarGuy?fre...

Twitter: twitter.com/EricTheCarGuy

Instagram: instagram.com/ericthecarguy

Wanna see more stuff like this from ETCG? Information on Premium Membership: ericthecarguy.com/premium-cont...

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.