How to Replace Passenger Engine Mount 2010 Volkswagen GTI

Опубликовано 8 мая 2018, 14:54

1A Auto shows you how to remove, install, change or replace a broken, worn out, motor mount. This video is applicable to the 2010 Volkswagen GTI.

🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaoF/1AXAA00013
• 10mm Socket 1aau.to/oZU/1AXAA00017
• 13mm Socket 1aau.to/o9p/1AXAA00015
• 18mm Socket 1aau.to/osY/1AXAA00043
• Needle nose pliers 1aau.to/onN/1AXAA00051
• Needle nose pliers 1aau.to/onN/1AXAA00052
• T25 Driver 1aau.to/osP/1AXAA00008
• T30 Bit 1aau.to/osP/1AXAA00008
• Ratchet 1aau.to/oaqe/1AXAA00016
• Socket Extensions 1aau.to/o9p/1AXAA00015
• Torque Wrench 1aau.to/ow4/1AXAA00044
• Anti-Freeze
• Drain Pan 1aau.to/ohA/1AXAA00320
• Pick 1aau.to/oiG/1AXAA00037

For More Info visit us at 1aau.to/h/bqN

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.