How to Replace Parking Brakes 05-10 Chrysler 300

Опубликовано 23 января 2017, 22:26

For More Info visit us at: 1aau.to/h/Sx

1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old emergency or parking brakes. This video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

🔧 List of tools used:
• Pry Bar 1aau.to/ohY/1AXAA00020
• 22mm Wrench
• 13mm Socket 1aau.to/oCF/1AXAA00015
• 15mm Socket 1aau.to/oCF/1AXAA00015
• 18mm Socket 1aau.to/onK/1AXAA00043
• E12 Inverted Torx Socket
• 1/2 Inch Breaker Bar 1aau.to/ocV/1AXAA00078
• Torque Wrench 1aau.to/osv/1AXAA00044
• Bungee Cord
• Chisel 1aau.to/obQ/1AXAA00055
• Hammer 1aau.to/oii/1AXAA00091

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Chrysler 300 2005-10 1st Gen: youtube.com/playlist?list=PL37...

For More Info visit us at 1aau.to/h/Sx

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.