How to Replace Passenger Upstream O2 Sensor 03-07 Cadillac CTS

Опубликовано 15 августа 2016, 17:40

Buy Now!
New O2 Oxygen Sensor Set from 1AAuto.com 1aau.to/ia/ACEEK00018

1A Auto shows you how to remove, install, change or replace an upstream oxygen O2 sensor on the passenger side. This video is applicable to the 06 Cadillac CTS

This process should be similar on the following vehicles:
2003 Cadillac CTS
2004 Cadillac CTS
2005 Cadillac CTS
2006 Cadillac CTS
2007 Cadillac CTS

🔧 List of tools used:
• 10mm Socket 1aau.to/oxc/1AXAA00017
• 15mm Socket 1aau.to/oBt/1AXAA00015
• 7mm Socket 1aau.to/oxc/1AXAA00017
• O2 Sensor Socket
• Socket Extensions 1aau.to/oBt/1AXAA00015
• Torque Wrench 1aau.to/orJ/1AXAA00044
• Painter's Tape

Subscribe: youtube.com/channel/UCVvE8kQTu...

Check out our playlist:
Cadillac CTS 2003-2007: youtube.com/playlist?list=PL48...

For More Info visit us at 1aau.to/h/Rg

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.