How to make a homemade Xbox 360 controller wireless receiver for PC! [HD]

Опубликовано 22 сентября 2013, 5:11

►►►Read First◄◄◄ * WATCH IN 1080p* !

Hi guys and welcome to my new Video, today i want to Show you how to build your own selfmade wireless Receiver for xbox 360 Controllers.

drivers:

microsoft.com/hardware/en-us/d...

written tutorial with wiring diagram:

se7ensins.com/forums/threads/h...

Zener Diode 5,1V:
radioshack.com/product/index.j...

" Things you will need:
•Soldering Iron
•Soldering Flux
•An Xbox 360 RF Module (Ring of light board at the front of the Xbox)
•An old USB you don't care about
•5v Diode
•Driver for the receiver
•A brain
•OPTIONAL: Play and charge kit to sync controller to board anytime you want to
Before we go on, I have to warn you that you MUST sync your controller to the RF Module via Xbox before you move on. You don't have to worry about this if you have a play and charge.

The revisions of the RF Boards matter for Windows 8 but not for Windows 7. Xenon RF Boards are Rev.A, and at one point they revised it and made Rev.B. If you guys use a Rev.B board you will get better results in range and overall performance and of course W8 synch-ability. "

To sync a controller either; A) sync the controller by plugging in the RF Module in an Xbox and sync with the Xbox's sync button, or B) Plug in the controller via play and charge while the ghetto receiver is in.


Thanks for watching !

If you like it, pls like and subscribe for more Content !

Cheers.