How to Make a Simple Propane Forge for Blacksmithing | I Like To Make Stuff

Опубликовано 19 сентября 2019, 15:00

I've been interested in blacksmithing for a while. Before I start hitting any metal, I decided to build a simple forge from some fire bricks and some plumbing fittings. Come see how you can make one too. I know I don't have the right tools for blacksmithing, but this is my first step.

VIDEOS I WATCHED FOR INSPIRATION
Essential Craftsman: youtube.com/watch?v=TS7wumQt0s...
Alec Steele: youtube.com/watch?v=ZNqYG5_f7s...
Make Stuff Nation: youtube.com/watch?v=BjqA4VQMpi...
Make Stuff Nation: youtube.com/watch?v=thNOSEhcQo...
ElementalMaker: youtube.com/watch?v=TCmQ_4CoQx...

TOOLS & SUPPLIES (affiliate links):
Fire Bricks: amzn.to/2O6YBIP
Reducer Coupling: amzn.to/2O8xyN8
Brass Square Head Plug: amzn.to/32NRPM8
Galvanized Coupling: amzn.to/2M1avBn
Bell Reducer: amzn.to/2M2b5hY
Brass Flare Union: amzn.to/2LWiD66
Steel Pipe: amzn.to/2Qbjy7U
Ball Valve: amzn.to/2LBbYiP
30 psi Propane Tank Regulator: amzn.to/34OExAM
kit.co/iliketomakestuff/my-met...
kit.co/iliketomakestuff/shop-s...

MUSIC: share.epidemicsound.com/iltms

I love watching blacksmiths work, and to begin a journey down the blacksmithing rabbit hole, I am building a simple propane forge. I'll show you how to make one for yourself, but be advised, use caution around gas or fire.

To prevent the fiery flame from burning everything down, it needs to be enclosed in a forge. The forge is simply a super-hot oven. There are a few options for the forge's structure and insulation materials. For our forge, I am using fire bricks that are 1.25" thick. I arranged the tiles into a rectangular box with an opening at the front. To cut one of the bricks to fit into the rear box space, I used a masonry cutting disc on my angle grinder. I also cut some of the brick in half to create smaller, moveable doors for the front opening.

To give strength to the loosely stacked bricks, I decided to weld together a border of 90-degree angle iron around the brick structure. I wanted to make sure that the welded frame didn't prevent me from being able to change out the fire bricks in the future if they begin to breakdown. The frame really helped solidify the forge and it gave some rigidity to the "front porch" area that is meant to hold the longer pieces of metal not being heated.

The burner is the real heart and soul for this project; the oven would just be a box with the heat source. There are a lot of videos on YouTube showing how to make forge burners, and I watched most of them. I made this burner in the style of all of those using readily-available plumbing components. The burner assembly is made of a high pressure regulator similar to the one you'd use on a grill, a steel pipe and a custom nozzle that blows the propane into the pipe while mixing with air.

I made the custom nozzle by drilling a tiny hole into a brass square plug fitting. I knew at the time that the hole may have been too big, 1/16" bit was the smallest one that I had. When lit, the fire burned blue with some residual orange flames. Apparently, this indicates that there is an inefficient fuel burn. I replaced the nozzle with a MIG welder tip and adjusted the placement inside the pipe and the fire was much more consistent and the metal inside the forge got much hotter.

It was so satisfying that I had a box of super hot fire that can heat up metal! I was super impressed with the fire bricks and their ability to retain the heat inside the forge. I was told by my good friend Alec Steele that the piece of metal was ready to be worked with a hammer once it turned a bright yellow color. It took my forge a little while before the metal got to the correct temperature, so I'm sure there is more dialing in to be done.

Obviously, I'm no expert metalworker. I am super excited about learning how to blacksmith and learning what tools and equipment that I need to be successful. I love learning new skills and increasing my ability to make different kind of things. If you are interested in blacksmithing, check out the wealth of knowledge online.

Subscribe: bit.ly/ILikeToMakestuffSubscri...
Check out my TopVideos!: bit.ly/ILikeToMakeStuffTopVide...

Learn 3d modeling, get digital plans, and cool merch at
iliketomakestuff.com

Want to support ILTMS? Get exclusive content and more...
iliketomakestuff.com/patreon

FOLLOW:
instagram.com/iliketomakestuff
twitter.com/iliketomakestuff
facebook.com/iltms

About I Like To Make Stuff:

We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!

These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!

I Like To Make Stuff
youtube.com/Iliketomakestuff