2004 Jeep Wrangler Stabilizer Link Replacement & Suspension Inspection -EricTheCarGuy

Опубликовано 28 августа 2015, 10:00

**Sponsored Video**

I teamed up with Advance Auto Parts and Moog on this one. This 2004 Jeep Wrangler came in with a noise from the front end that turned out to be a broken stabilizer link. While we were there, I decided to do a complete suspension inspection to look for other issues. We may be going back to do those rear stabilizer links at some point as a result of what we found.

I ended up replacing the stabilizer links on both sides as well as the bushings. The noise is gone and the Jeep corners much better now thanks to those Moog problem solver parts.

You may run into some trouble getting the old stabilizer links off. I used an air hammer. You may be able to use just a hammer. Penetrating oil would be your friend too. In all, the job isn't too difficult. Just be careful of the finish on the front of the Jeep when replacing the stabilizer bushings.

Camera: Brian Kast

Thanks for watching!

Check out the Advance Auto YouTube Page: youtube.com/user/AdvanceAutoPa...

Find an Advance Auto Parts store near you : bit.ly/AdvanceStoreLocator
Buy Online at Advance and Pick-Up in Store in 30 minutes: bit.ly/ShopAdvanceAutoParts
Check out Advance Monthly Specials: bit.ly/AdvanceMonthlySpecials

Moog: moog-suspension-parts.com/?par...

The best place for answers to your automotive questions: ericthecarguy.com

Related videos.

How To Safely Lift and Support Your Vehicle: youtube.com/watch?v=8OyzbGDn6x...

Tools

Silicone paste: jbtoolsales.com/3m-8946-silico...

Silicone Spray: zepautomotive.com/product/Sili...

Discussion about this video: ericthecarguy.com/kunena/18-Th...

Useful articles.

Engine overheat: ericthecarguy.com/faq/what-to-...

No start problems: ericthecarguy.com/faq/solving-...

Idle issues: ericthecarguy.com/faq/solving-...

Performance issues: ericthecarguy.com/faq/solving-...

Diagnosing Noises: ericthecarguy.com/faq/diagnosi...

Diagnosing Vibrations: ericthecarguy.com/faq/determin...

Electrical Problems: ericthecarguy.com/faq/solving-...

Brake Issues: ericthecarguy.com/faq/solving-...

Transmission issues: ericthecarguy.com/faq/solving-...

HVAC problems: ericthecarguy.com/faq/solving-...

Buying a Used Car: ericthecarguy.com/faq/what-to-...

Leaks: ericthecarguy.com/faq/finding-...

MPG: ericthecarguy.com/faq/finding-...

The best place for answers to your automotive questions: ericthecarguy.com

Social Network Links

Facebook: facebook.com/EricTheCarGuy?fre...

Twitter: twitter.com/EricTheCarGuy

Google+: plus.google.com/10019518019669...

Instagram: instagram.com/ericthecarguy

Information on Premium Membership: ericthecarguy.com/premium-cont...

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.