How to Replace Outer Tie Rods 2003-2007 Honda Accord

Опубликовано 10 сентября 2024, 12:46

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/184/hj/tie-rods-and-...

This video shows you how to install new outer tie rods on your 2003-2007 Honda Accord. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

Estimated installation time for a professional technician is approximately: 1 hour 42 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

🔧 List of tools used:
• 19mm Wrench 1aau.to/oan3/1AXAA00010
• 24mm Wrench
• 17mm Socket 1aau.to/ocrU/1AXAA00015
• 19mm Socket
• Pliers
• Torque Wrench 1aau.to/obs4/1AXAA00044
• Copper Anti-Seize
• Gloves 1aau.to/obBH/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oaLu/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oaxV/1AXAA00065
• Wheel Chocks

Subscribe: youtube.com/channel/UCVvE8kQTu...

For More Info visit us at 1aau.to/h/gzv

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.