Wireless lag switch tutorial Xbox 360 / PS3- Nettools 5.0 - Easy [HD] [DE] [EN]

Опубликовано 24 марта 2013, 14:27

►►►Read First◄◄◄ **watch in 1080p**

Hi guys, today i´ll Show you how to make a wireless lag Switch for xbox 360 ps3, pc .. with nettools 5.0 :-) its for games like COD black ops 2..

●▬▬▬▬▬▬▬▬▬▬▬▬▬●

What is a lag switch?
A lag switch is a method or a tool that is used to flood your connection with data, causing it to LAG. This can be done in many different ways, but the one I'm going to show you is by far the easiest one.

●▬▬▬▬▬▬▬▬▬▬▬▬▬●

Download here:

mabsoft.com/nettools.htm

Requirements.
- A Computer or Laptop placed nearby your console, running on the same Wireless WiFi network as your Xbox/Ps3.
- Net Tools 5. Download .
- A brain.

●▬▬▬▬▬▬▬▬▬▬▬▬▬●

Step 1. Install Net Tools 5, and open it. Click "Start" - "Network Tools" - "UDP Flooder" (Arrow down).

Step 2. Now we need to type in what port that we want to LAG. Your console is mainly effected by two ports. Those two are port 12 and port 27.
port 12 is for slower LAG, and is not so effective, while port 27 will make an instantly freeze and is in my opinion the best one to use. Type in what port you want (12.12.12.12 or 27.27.27.27), and set your speed to 10(Slider).


Step 3. Next up we will assign how much data that we want flooding the selected port. We do this by selecting the "Data" text, and hold "Ctrl+V) for about 10 seconds. The longer you hold it, the more data will flood the port. Holding it for about 10 seconds is more than enough tho.

Step 4. You are now set, and all you have to do is to see it in action. Jump in a game of Mw3 for example, and watch your connection while activating the lag switch. (Start - Stop) If done correctly, it should drop down when the switch is activated and restore when you turn it off.

I hope the speed was ok this time :-)

Thanks for watching ! cheers :)