How To Change Transmission Fluid - Honda S2000

Опубликовано 25 декабря 2016, 15:00

How To Change The Transmission Oil In Your Car - Manual Honda
Manual Transmission Fluid - amzn.to/2gtdPI5
Subscribe for new videos every Wednesday! - goo.gl/VZstk7

Tools Used:
Transfer Pump - amzn.to/2gz2SFL
Manual Transmission Fluid - amzn.to/2gtdPI5
Digital Torque Wrench - amzn.to/2gb7Zbz
Socket Set - amzn.to/2fIFOlZ
14 MM Crush Washers - amzn.to/2fv33Ne
20 MM Crush Washers - amzn.to/2g7VlII

Related Videos:
Lift Car On To Jack Stands - youtu.be/X2XdxPJnpNE
Change Your Engine Oil - youtu.be/uQFYCKekVcE
Change Your Diff Oil - youtu.be/elazlUJSC8A
Honda S2000 Playlist - goo.gl/FflSr1

1. The first thing you want to do is make sure the car is on level ground, and raise it up onto jack stands ensuring that it is still level. I had an additional video on how this is done if you are curious. It is important that the car is level so that you add the appropriate amount of oil to the transmission housing.

2. With a drain pan located underneath, you’ll want to locate and remove the oil filler plug. This is the plug on top, not to be confused with the bottom plug, which is the drain plug. Removing the fill plug will allow you to check the cleanliness of the oil, as well as the level.

3. As you can see, with the old oil on the left and the new oil on the right, the old oil is clearly dirty and in need of replacement. Our next step is to remove the drain plug and drain the transmission fluid.

4. With the fluid drained, reinstall the drain plug, making sure to use a new 14 mm washer, and use a torque wrench to tighten the bolt to 29 lb-ft. Always be careful not to over-tighten, as you could damage the threads.

5. Next, begin refilling the transmission fluid. To do this, I’m using genuine Honda manual transmission fluid, as well as a simple transfer pump. I’ll include a link to this tool in the video description.

6. Pump in the transmission fluid until you have some start to spill out from the filler hole. This ensures that your transmission fluid is at the correct height, and you’ve added the correct amount.

7. Re-install the oil filler plug with a new 20 mm washer, which can be purchased from Honda for about sixty cents. Use a torque wrench to tighten this bolt to 33 lb-ft.

8. With the fluid in place and both bolts torque to spec, simply wipe up any excess oil that remains on the transmission case, and you’re all done!

Engineering Explained is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Don't forget to check out my other pages below!
Facebook: facebook.com/engineeringexplai...
Official Website: howdoesacarwork.com
Twitter: twitter.com/jasonfenske13
Instagram: instagram.com/engineeringexpla...
Car Throttle: carthrottle.com/user/engineeri...
EE Extra: youtube.com/channel/UCsrY4q8xG...

NEW VIDEO EVERY WEDNESDAY!