How to Install SSD in PC - Kingston Technology
322 708
283.8
Kingston Technology252 тыс
Следующее
01.02.13 – 285 0372:24Популярные
160 дней – 2 2273:43
29.11.22 – 1 3310:53Опубликовано 1 февраля 2013, 18:02
A step-by-step walkthrough showing how to install your Kingston SSD into a desktop system. This video shows you how to check the space used on your HDD, as well as, how to install the SSD into your desktop with the provided hardware.
kingston.com/en/blog/pc-perfor...
kingston.com/en/blog/personal-...
Transcript:
Hi. I'm Cameron from Kingston. Today we're gonna show you how to install an SSD drive into your computer. Kingston's SSD upgrade bundle is designed to make transitioning from a hard drive to a solid state drive fast and easy. Before beginning installation, it is important to verify that the SSD provided in the kit is larger in capacity than the used space on the system hard drive you're replacing.
To determine the used space on your hard drive, boot your computer to your desktop. Double-click on My Computer. Single right-click on the C drive and select Properties. If the used space is greater than the capacity of the SSD you must move some of your data such as pictures, movie and music, off the drive to an alternative data source, such as an external hard drive or a USB flash drive, until the used space is less than the new SSD capacity.
After the cloning portion of the installation is complete, these files can be moved back to their original location on the hard drive. Turn off the power to your computer and disconnect the power source. Next, remove the system chassis cover. This is usually accomplished by removing a side panel or top cover from the system to gain access to the inside of the computer.
Attach the 2.5 to 3.5 inch mounting brackets provided in the kit to the SSD by aligning the mounting screw holes on the brackets with those on the SSD. Next, locate an available 3.5 inch drive bay inside your computer and install the SSD using the mounting screws provided in the kit.
In some cases it may be necessary to attach proprietary mounting screws or brackets, that were provided with your computer, to the SSD adapter brackets. Next, locate and attach one end of the SATA data cable provided in the kit to the SATA interface connector on your computer's motherboard, or SATA host adapter.
Then, attach the other end of the SATA interface cable and SATA power cable to the SSD.
kingston.com/en/blog/pc-perfor...
kingston.com/en/blog/personal-...
Transcript:
Hi. I'm Cameron from Kingston. Today we're gonna show you how to install an SSD drive into your computer. Kingston's SSD upgrade bundle is designed to make transitioning from a hard drive to a solid state drive fast and easy. Before beginning installation, it is important to verify that the SSD provided in the kit is larger in capacity than the used space on the system hard drive you're replacing.
To determine the used space on your hard drive, boot your computer to your desktop. Double-click on My Computer. Single right-click on the C drive and select Properties. If the used space is greater than the capacity of the SSD you must move some of your data such as pictures, movie and music, off the drive to an alternative data source, such as an external hard drive or a USB flash drive, until the used space is less than the new SSD capacity.
After the cloning portion of the installation is complete, these files can be moved back to their original location on the hard drive. Turn off the power to your computer and disconnect the power source. Next, remove the system chassis cover. This is usually accomplished by removing a side panel or top cover from the system to gain access to the inside of the computer.
Attach the 2.5 to 3.5 inch mounting brackets provided in the kit to the SSD by aligning the mounting screw holes on the brackets with those on the SSD. Next, locate an available 3.5 inch drive bay inside your computer and install the SSD using the mounting screws provided in the kit.
In some cases it may be necessary to attach proprietary mounting screws or brackets, that were provided with your computer, to the SSD adapter brackets. Next, locate and attach one end of the SATA data cable provided in the kit to the SATA interface connector on your computer's motherboard, or SATA host adapter.
Then, attach the other end of the SATA interface cable and SATA power cable to the SSD.
Свежие видео
2 дня – 35 15027:39
2 дня – 4 3213:24
3 дня – 47 58315:27
Случайные видео
183 дня – 4590:27
323 дня – 8 2285:50
364 дня – 2 792 69418:50
16.07.23 – 1 7370:15
15.02.22 – 104 1887:11
19.01.17 – 5 0921:46
1 день – 1923:53
2 дня – 2 20317:41
2 дня – 3 1271:18
2 дня – 26211:49
4 дня – 82 4791:16:20
5 дней – 4 50013:13
8 дней – 273 0360:16
1 день – 1 1550:06
1 день – 1951:00